Single hulls
NABWORK 2612 HYB
A single-hull multi-purpose service vessel built in steel. The boat is designed for use in various aquaculture operations, and it is dimensioned for heavier operations. NabWork 2612 has great pulling power and good positioning skills. The equipment consists of proven, high-quality products. There is a high level of comfort on board with a large mess/galley solution and 8 bright, pleasant one-person cabins. You will experience practical solutions and consistently good technical quality.
The standard NabWork 2612 HYB is delivered as a plug-in-hybrid.
| Construction | Single hull |
| Design | Marin Design |
| Material | Steel |
Main dimensions
| Length o.a.: | 26,00 m |
| Breadth o.a.: | 12,40 m |
| Depth moulded: | 5,50 m |
Capacities:
| Fuel | 60 m³ |
| Water | 24 m³ |
| Ballast tanks | 140 m³ |
| Bollard pull | 25 tonn |
| Load capacity deck | ca. 150 t. |
| Gross deck area behind wheel house | ca. 155 m2 |
| Speed, no payload | ca. 12 knop w/25% filling with 100% MCR |
| Septic | ca. 11 m³ |
| Cargo space | 130 m³ |
| Trade area | 5 |
Cabins:
| 8 x single cabins |
Propulsion maschinery:
| Engine | 2 x Danfoss Editron Permanent T4000 elektric engines |
| Performance | 2 x 809 kW |
| Energy storage system | 2068 kWh Akazem battery |
Generator:
| Caterpillar C32, 820ekW |
| Caterpillar C18, 460 ekW |
Hydraulics:
| NO1. eHPU 200L/m 128kW 1250 litres tank | |
| NO2. 300 L/m 2x 101 kW 1250 litres tank |
Gear and propeller system
| Brunvoll CP 56/4. 4-blade propeller with nozzle ø2700 mm |
| Reduction gear: Brunvoll ACG_TS800 |
| Thrusters: AFT: Brunvoll FU37LTF1000 250 kW |
| FW: Brunvoll FU45LTA1225 300 kW |
Navigation and communication:
| Furuno radar IMO cat 3 |
| Olex 3D chart plotter with M4 computer |
| Dual ECDIS chart system |
| Furuno T2424 |
| Furuno Bridge Watch System |
| Furuno AIS Class A |
| Simrad Autopilot |
| Furuno satellite compass SC-70 |
| Furuno echo sounder |
| Furuno VHF |
| Camera package for deck, engine room, aft, port and starboard side cameras, as well as underwater camera for propeller inspection. |
| 2 x 55-inch monitors with NAVY MULTIVIEW KVM MATRIX for main control position |
| 1 x 32-inch monitor with NAVY MULTIVIEW KVM MATRIX for aft control position |
| mLINK connect |
Cranes:
| Deck crane 1 BB Aft – Palfinger PK 150002 MH | |
| Deck crane 2 Mid – Palfinger PK 41002 MG | |
| Deck crane 3 FW – Palfinger PFM2500 MD | |
| All with remote control |
Anchor winch:j
| MBH electric 24K2 |
Other deck equipment:
| Capstan: | |
| 1 x MBH hydraulic 5T capstan Port side | |
| 2 x MBH Hydraulic 8T capstan Starboard side | |
| Winch: | |
| MBH Electric double winch 80/40t | |
| Stern roller: | |
| SWL 85 tonn, ø1000mm, L 4000mm | |
| Deck module (shark jaw/ Towing pin): | |
| MBH ref 80/40 t | |
| Plate holder: | |
| -MBH LPH20 + 1.5m telescopic rail, 20 t |
Washing equipment:
| 1x Mekon low-pressure washing system |
| 1x Tenfjord HP Net cleaner HTS28/280 in the engine room. Hose reel with HP hose and lance in the ROV garage. |
Other:
| ROV Hangar/workshop with electric vertical door Davit for tender on Port side |
