Fishery
1575 Fishing boat / Serviceboat HYB
The market’s roughest combination boat under 15 meters. With a full 7.5 meter width, up to two cranes, cabin capacity for up to 6 people on a fishing certificate and cargo space of 80 m3, this is a real power plug. The boat is equipped with Nogva or Nogva Heimdal propulsion machinery and gear / propeller systems. Smart solutions for changing between yarn operation and service operation, and customized solutions for mounting winch and ROV equipment in service operation make the boat the ultimate combo and ensures full year operation for shipowners.
The standard NabWork 1575 HYB is delivered as a plug-in-hybrid, but can be delivered with pure electric propulsion machinery or conventional propulsion machinery on request.
| Construction | Single hull |
| Design | Marin Design |
Main dimensions
| Length o.a. | 14,99 m |
| Breadth o.a. | 7,50 m |
| Depth moulded | 3,80 m Main deck 5,95 m shelter deck |
Capacities
| Fuel | 10,0 m³ |
| Water | 4,0 m³ |
| Payload | Approx. 80 m³ |
| Septic | Approx. 1,0 m³ |
| Speed no payload | Approx. 9 knots with 25 % fylling with 100% MCR |
Cabin capacity
| 3 x two-man cabins |
Propulsion machinery*
| Engine | Nogva Scania DI 16 71M 600 hp |
| Gearbox | Nogva HC-258, rotating propeller system |
| Bow thruster | 2 x 160 hp Petters Marine, PMH bow thruster |
| *Can be ordered with diesel mechanical propulsion |
Bow thruster
| Bow and stern | 80 hk Petter Marine, PMH ST60-80 |
Generator/ shore
| 2 x John Deere 4045 TFM50 | |
| Generator is adapted as needed | |
| Performance: 57 kW at 1500 rpm | |
| Shore seperate transformer 25 kVA/3x63A |
Hydraulics
| 2 x PTO with 145 ccm Parker pumps |
Cleaning equipment
| 1 x combined fire and flushing pump |
| 1 x Karcher HDS 13/20 -4S, 21 l/min, 200 bar. Steam function |
Navigation and communication
| Furuno Radar and chart plotter GPS |
| Furuno VHF radio |
| AIS |
| Bridge-keeper |
| Furuno FCV-1150 echo sounder |
| Autopilot Simrad AP70 |
| Olex |
| mLink monitor |
Cranes
| -Palfinger PK 32080 (M) D Reach: 13,7 m Rotation: 400 degrees Delivered with scanreco radio control |
Winch
| 15 t throw winch with 3 t traction on the outermost layer |
| Detachable roll in the stern behind winch, slightly wider than winch with steel guide pins |
Capstans
| 1 x 5 t, height approx. 500mm, upper approx. 320mm. Detachable (same foundation as yarn tails) |
| 1 x 2 t recessed in a row with flush cover all over the box |
| Both included foot pedals and emergency stops |
Net hauler
| 1200 kg – with hydraulic swing of the tail. Lorentzen Hydraulikk AS. |
Net Clearer
| Hydema HGA005-1EL. Net clearer is supplied by Lorentzen |
ROV-system
| 2 stk ROV-cable drums are mounted on deck. See GA |
| ROV operating center in wheelhouse (chair on rail, screens etc. ) See GA |
Other
| Plate thicknesses: | |
| Wheelhouse | 5 mm |
| Starboard side | 8 mm |
| Port side | 7 mm |
| Exterior main deck | 10 mm |
| Other deck | 7 mm |
| Skeg | 8 mm |
| Bottom of the boat | 7 mm |
| Other hulls | 6 mm |