NabWork 2411 - Moen Marin

Single hulls

NabWork 2411

A single-hull multifunctional service vessel built in steel. The boat is designed for use in various aquaculture operations, and it is designed for heavier operations. NabWork 2411 has great traction and good positioning ability. The equipment consists of proven high quality products. The boat is equipped with propulsion machinery from Catepillar, swivel gear and propeller system from Finnøy, Palfinger cranes of 150tm and 90tm, 60T and 15T towing winch and shark jaw/ tow stick module. There is high comfort on board with a large booth solution and 6 bright light one-man cabins. You will experience practical solutions and consistently good technical quality.

ConstructionSingle hull
DesignMarin Design
Main Dimensions
Length o.a.23,98 m
Breadth o.a.11,20 m
Depth moulded4,20 m
Fuel40 m³
Water20 m³
Ballast tanks100 m³
Load capacity deckApprox. 125 t
Gross deck area behind wheelhouseApprox. 137 m2
Speed no payloadApprox. 11 knots with 25% filling with 100% MCR
Trade area5
Cabin capacity
6 x one-man cabins
Propulsion machinery
EngineCaterpillar, C32Acert – water cooled 4-stroke engine,
12-cylinder v-engine with turbo chargers and charger air coolers,
with direct injections.
Performance746 kW (1000 hp) at 1600-1800 o/min
Engine aggregate 1
BrandCaterpillar, C18
Performance275 ekW at 1500 rpm, 400V, 50hz
Engine aggregate 2
BrandCaterpillar, C7.1
Performance118 ekW at 1500 rpm, 400V, 50hz
Gear and propeller systems
Finnøy G42FK, 1900mm four-bladed propeller w/propeller nozzle.
Bow thrusters
2 x 250 hp
Navigation and communication
Furuno radar IMO cat 3
Olex chart plotter
Telchart dual ecdis chart system
Furuno digital echo sounder
Furuno Radio VHF
Furuno navigational watch system
Phototeck internal communication
Broadband with double 4 sim
mLINK monitor
Deck crane BB Palfinger PK150002 (M) H
Reach: 21,5 m, with 6,5 t mounted winch
Rotation: Continuous
Deck crane SBPalfinger PK90002 (M) H
Reach: 22,0 m, with 6,5 t mounted winch
Scanreco RC400 remote control.
Work/ Towing and anchor handling winch
One double work/ towing and Anchor handling winch, 60 t, built together
with a 15 t winch.
2 x 8 t
2 x 3 t
All included foot pedals and emergency stops

Chain lock and towing pins

SHM deck module (80t/25t), hinged with hydraulic open / close function
Stern roller 800 mm
Hydraulic loading hatch
Hydraulic high-pressure washer
2 x cameras on working deck
1 x camera in engine room
2 x cameras on ship side
1 x underwater camera/ propeller camera
Prepared for fibre rope lock and lock plate holder
Prepared for ROV and diving equipment, with ROV hangar, as well as
ROV and diving console in the wheelhouse