Single hull

NabWork 2411

A single-hull multifunctional service vessel built in steel. The boat is designed for use in various aquaculture operations, and it is designed for heavier operations. NabWork 2411 has great traction and good positioning ability. The equipment consists of proven high quality products. The boat is equipped with propulsion machinery from Catepillar, swivel gear and propeller plant from Finnøy, Palfinger cranes of 150tm and 90tm, 60T and 15T towing winch and shark jaw / tow stick module. There is high comfort on board with a large booth / gun solution and 6 bright light one-man cabins. You will experience practical solutions and consistently good technical quality.

Main Dimensions
Length o.a.23,98 m
Breadth o.a.11,20 m
Capacities
Fuel40 m³
Water20 m³
Ballast tanks100 m³
Speed no payloadApprox 11 knots with 25% filling with 100% MCR
Cabin capacity
6 x one-man cabins
Propulsion machinery
EngineCaterpillar, C32Acert – water cooled 4-stroke engine,
12-cylinder v-engine with turbo chargers and charger air coolers,
with direct injections.
Performance746 kW (1000 hk) ved 1600-1800 o/min
Engine aggregate 1
BrandCaterpillar, C18
Performance275 ekW at 1500 rpm, 400V, 50hz
Engine aggregate 2
BrandCaterpillar, C7.1
Performance118 ekW at 1500 rpm, 400V, 50hz
Gear and propeller systems
Finnøy G42FK, 1900mm four-bladed propeller w/propeller nozzle.
Bow thrusters
2 x 250 hk
Navigation and communication
Furuno radar IMO cat 3
Olex chart plotter
Telchart dual ecdis chart system
Furuno digital echo counder
Furuno Radio VHF
Cranes
Deck crane BB Palfinger PK150002 MH m/6,5 t winch.
Reach 21,5 m
Deck cranes SBPalfinger PK90002 MH m/6,5 t winch, Reach 22,0 m
Scanreco RC400 remote control.
Work/ Towing and anchor handling winch
One double work/ towing and Anchor handling winch, 60 t, built together
with a 15 t winch.
Capstans
2 x 8 t
2 x 3 t
Chain lock 80 t. Towing pins 25 t.
Other
Stern roller 800 mm
Hydraulic loading hatch
Hydraulic high-pressure washer
Cameras:
2 x cameras on working deck
1 x camera in engine room
2 x cameras on ship side
1 x underwater camera/ propeller camera
Prepared for fibre rope lock and lock plate holder
Prepared for ROV and diving equipment, with ROV hangar on main deck,
ROV and diving console in the wheel house and a foundation for ROV winch